>> Information
S16-A Conductivity sensor adopts new four-electrode structure design, automatic temperature compensation. Housing material is stainless steel 316, works with RS485, MODBUS standard communication protocol. It can be worked as a single parameter sensor, also can be installed inside of a water system for online long-term monitoring water quality.
Suitable for surface water, groundwater, municipal sewage, industrial wastewater, and other applications.
>> Characteristics
Four-electrode measurement principle, no passivation, more accurate;
Support kinds of installation methods, can use different shell materials, thus suitable for many application;
Automatic temperature compensation;
Strong, corrosion resistance, anti-interference;
Wide measurement range;
Fast response time.
>> Parameters
Specification | Details |
Size | Φ30mm*225.50mm (length) |
Weight | 0.24KG |
Main Material | 316 Stainless Steel + POM |
O ring: viton ring+ rubber ring | |
Cable: PVC | |
Waterproof Rate | IP68 |
Measuring Range | 0 -200mS/cm |
Temperature: 0~50℃ | |
Measuring Accuracy | 0 -100 mS/cm, ±1%; 100-200 mS/cm, ±2% |
Temperature: ±0.2℃ | |
Resolution | 1μS/cm-100μS/cm ( according to range) |
Data Output | RS 485, Modbus |
Power | DC 12~24V, current < 20mA |
Storage Temperature | -20℃~+60℃ |
Working Temperature | 0~50℃ |
Pressure Range | ≤1Mpa |
Calibration Way | One point or two point calibration |
Cable Length | 5m standard cable, other length can be optional; |
Guarantee Period | 12 months |
1. Protective cap |
2. EC probe |
3. NPT 3/4 thread |
4. Body housing Stainless steel |
5. NPT 3/4 thread |
6. Plug |